Magnetic Tool at Earth-Chain > ELM Series Load of Holding Power

Earth-Chain Enterprise Co., Ltd.

ELM Series

» Home > Products > Magnetic Tool > ELM Series > Load of Holding Power

Holding power changes depending on material thickness, attractive surface roughness of material, material quality and clearance between the work piece and the magnet. (See charts below)

Differences in Holding Power by Thickness

	Thickness		Percentage of lifting capacity
	mm	inch	ELM-3000	ELM-2000	ELM-1000	ELM-600	ELM-300	ELM-100
T1	up60	up2.36"	100%	100%	100%	100%	100%	100%
T2	55	2.16"	95%	100%
T3	50	1.97"	90%	95%
T4	45	1.77"	85%	90%
T5	40	1.57"	80%	85%
T6	35	1.38"	70%	75%	90%
T7	30	1.18"	60%	65%	80%
T8	25	0.98"	50%	55%	70%	90%
T9	20	0.79"	40%	45%	60%	75%	90%
T10	15	0.59"	30%	35%	50%	60%	70%
T11	10	0.39"	20%	25%	35%	45%	50%	70%
T12	5	0.20"	10%	15%	20%	25%	30%	40%

Differences in Holding Power by Attractive Surface Roughness (applicable to all models):

Differences in Holding Power by Material Quality (applicable to all models):

Magnetic Tool - ELM Series - Load of Holding Power

Calculating Formula for "Range of Lifting Capacity" → (T x F x M x Capacity of Lifter)

Example :
Terms of workpiece : T8, F1 and M2
90% x 125% x 85% x 600kg (ELM-600)=573KG

Relative Product :

Home > Products > Magnetic Tool > ELM Series
Home > Products > Magnetic Tool > ECB Series